RadioMaster TX16S MK3 MAX — ELRS in hand

Full-size EdgeTX with internal ExpressLRS Gemini-X

AG02 CNC gimbals · 5″ touch · dual-band RF
We already own a TX16S MK3 MAX. That stays our transmitter: EdgeTX (≥ 3.0) + internal ExpressLRS Gemini-X (2× LR1121, 2.4 GHz + Sub-G 900 MHz). No external ELRS module needed. RC to the aircraft goes via XR4 on CRSF.
Why this radio
- Matches XR4 Gemini-X one-to-one (dual-band).
- Premium gimbals; full-size for missions and telemetry (Yaapu).
- Flash the internal ELRS module: web flasher → Hardware
RadioMaster TX16S MK3→ EdgeTX Passthrough.
Store: RadioMaster TX16S MK3 MAX. Manual: TX16S-MK3-manual-1.4.pdf. Bind: RadioMaster bind help.
What we do
- Set model Internal RF to CRSF (ELRS).
- Bind via bind phrase (recommended) or SYS → Tools → ExpressLRS Lua → Bind.
- Set Arm/CH5 correctly (ELRS dynamic power).
- With ELRS hybrid switches, put flight modes on CH12 (not CH8).
- On-screen telemetry: Yaapu + ArduPilot CRSF passthrough.
- On the FC: XR4 on TELEM2 — see ArduPilot + ELRS setup.
EU / NL: Sub-G (868/900) power is legally limited. 2.4 GHz is the primary long-range band unless you use Gemini RX plus a legal Sub-G setup.
Read next
- ELRS receiver XR4 — CRSF to Pixhawk
- ArduPilot + ELRS setup — SERIAL2 / PROTOCOL=23
- ExpressLRS explained
- Step 4 — radio & telemetry
ArduPilot wiki
Reviews: Oscar Liang — TX16S MK3 · YouTube review.
Choice log
| What | RadioMaster TX16S MK3 MAX (already owned) |
| Why | Internal ELRS Gemini-X + EdgeTX; matches XR4 |
| Our pick | The MAX we already have — no external module; Standard/Pocket not needed |
Photos



