Step 1 — Airframe & mechanics: build the UL8

We start where every craft starts: the frame. On the AOS UL8 V5 we mount motors, ESC, stack, and later every sensor. This step is about strength, vibration,…

Step 1 — Airframe & mechanics: build the UL8

We start where every craft starts: the frame. On the AOS UL8 V5 we mount motors, ESC, stack, and later every sensor. This step is about strength, vibration, and mounts. Not firmware yet.

More context: what we build. Tools: tools.

AOS UL8 V5 — airframe & build

AOS UL8 V5 — airframe & build

More images

UL8 V5 render

UL8 V5 render

T-Motor F100

T-Motor F100

T-Motor Pacer 60A V2

T-Motor Pacer 60A V2

What we choose

We build on a proven 8″ long-range frame. Soft-mount for the stack. Motors and ESC that fit 6S and 8″ props. We stage the props, but we only fit them after power checks.

What we do

  1. Assemble the UL8 V5 (arms, hardware, soft-mount for the stack).
  2. Mount F100 1100KV motors and the Pacer 60A V2. Check prop rotation.
  3. Solder the capacitor from the Pacer kit (or upgrade ~2200 µF @ 35–50 V) onto the ESC power pads — see power & capacitors and Oscar Liang.
  4. Stage HQProp LR8×4.2×3 (fit only after power checks without props).
  5. Prep TPU/3D prints for antennas and GPS masts.

Manuals

Video

AOS UL7/8/10 V5 Build Guides — Chris Rosser — YouTube

Read next

Done when

The frame is built. Motors and ESC are secure. The cap is on. Stack and antenna mounts are ready for avionics.

Choice log

What Mount frame + propulsion
Why No solid frame means no reliable IMU or stack
Our pick UL8 V5 + F100 + Pacer + HQProp; soft-mount stack; cap on ESC

Photos

Leave a Reply

Your email address will not be published. Required fields are marked *